Multiple Patterns in One Unit: Custom-configure the unit to the exact project needs and your personal tastes.
Efficient / Low Power Use: Highest efficiency design for low power consumption versus competing units. Reduces operating costs over the entire life of the unit. 13.4 running amps on a 240V single phase circuit or 10.3 amps on a 208/240V, 3 phase circuit for low operating costs.
Clog Resistant: Unique water-deflecting nozzle design gives you the most clog-resistant model on the market. Successful shallow water operation in as little as 24"
Rugged Motor: Environmentally friendly design with a hard-face internal mechanical seal and external lip seal for protection against leaks. Seals are silicone carbide for long life. Long-life top and bottom ball bearings. Flood oil lubricated for excellent heat dissipation.
Corrosion Resistant: Superior dependability in salt-water or other corrosive environments. All external metal motor, float, and hardware components are of stainless steel composition and protected by a sacrificial zinc anode.
Low Maintenance: Clean the motor housing once or twice per year and replacing the sacrificial zinc anode when visibly corroded.
Fully Tested: ETL listed to stringent UL and CSA Safety Standards .
Ships Easily: Via UPS in 4 or 5 boxes (add 1 box for lights)
Choice of Cord Lengths: SJTOW or SOOW underwater rated power cord length options of 50', 100', 150', 200', 250', 300', or 400' (500' special order) Includes three 50' braided nylon mooring ropes.
Kasco Marine's 3.1JF (Single Phase) and 3.3JF (3 Phase), 3 hp Floating Decorative Fountain provides the power needed to adequately aerate larger ponds and provide eye-catching decorative displays.
6 Fountain Patterns for the Price of One!
Click on the thumbnails below to see larger images of the each fountain in use
REDWOOD
24' Tall x
8' Wide Narrow Geyser
LINDEN
19' x 4.5' Inner &
8' x 35' Outer Tier
SPRUCE
21' Tall x
13' Wide Geyser
JUNIPER
9' Tall x
48' Wide "V"
WILLOW
13' Tall x
35' Wide "V"
BIRCH (No Nozzle)
14.5' Tall x
10' Wide Geyser
Each 3.1JF & 3.3JF is supplied with 5 different interchangeable nozzles, providing you with the versatility of 6 different patterns for displays of up to 24 feet in height or 45 foot in diameter. You can easily change nozzles to fit the specific pond dimensions, wind conditions and the desired aesthetic effect.
The 3.1JF is available with an extremely efficient 240 volt Single Phase, 60 Hz motor. The 3.3JF is available with an extremely efficient 208/240V 3 phase, 60Hz motor. 50Hz versions also available.
The 3.1JF is supplied with a state-of-the-art GFCB protected control panel, model C-85. The panel includes a 240 volt control panel with timer, GFCB protection, 120V GFI protected outlet for lights, and photocell for light operation. Kasco recommends a licensed electrician to install the C-85 control panel and the 3.1JF if you plan to hard-wire the unit into the C-85 control panel.
The 3.3JF, 3 phase unit is supplied with a simple to use, all inclusive GFI protected 3 phase control panel, model CF-3235. Without the confusing options, these panels include all the best features. Included in this UL-508A, non-metallic 4x/3r panel is a true, 3 phase rated personnel protection GFI with a 5ma trip level. Also included is a motor starter with adjustable overload, lightning/surge protection, two 24 Hour time clocks (one for the unit and one for lights), and a Hand-Off-Auto switch. Other features are an angled field wiring terminal block for easy installation, input terminals for field installed interlock, and startup instructions with wiring diagram in the door. A licensed electrician should install this control panel.
Add a LR-375 Low Voltage Light Kit to the 3.1JF or 3.3JF to extend its beauty into the nighttime hours. Lighting enlivens the water display, turning water drops into a glimmering jewels of light while providing a resort-like appearance to the water feature.
The LR-375 Low Voltage Light Kit includes three machined-bronze light fixtures each with 75 watt MR-16 Halogen lamps. The lighting kit’s transformer is integrated into the system, so there’s no extra wiring required. Simply plug it into the C-85 Control Panel and the lights will operate whenever the unit operates during darkness. Three clear MR-16 lamps are included with each kit. As an option, you can choose any or all of the optional colors of Red, Green, Blue & Yellow. Two sets of LR375 lights can be added for more dramatic displays.
The 3.1 JF & 3.3JF boasts an innovative float design with a low profile in the water for enhanced appearance, plus an attractive decorative shape.
The 3.1 JF & 3.3JF boasts an innovative float design with a low profile in the water for enhanced appearance, plus an attractive decorative shape.
