3 nyckel tips för att installera om din Kasco Unit
By: Joe Holz, Director of Sales | April 13, 2018
____________________________________________________________________________________________
Though it may not feel like it, spring is here! Which means it’s time to get those fountains, aerators, and other Kasco units out of winter storage and prepare to reinstall them in your pond. But before reinstalling, there are a few things to consider. Here’s a few tips and helpful reminders to ensure a smooth process:
Reinstalling Your Kasco Unit
- Wait to reinstall units until the pond is completely ice free and water temperatures are consistently above freezing. Not only is it unsafe to walk on thinning ice during re-installation, but ice that breaks off during the melt could cause damage if it encounters the unit. Remember, damage caused by ice is not covered under the Kasco warranty.
- When your pond is, and will remain, ice free, pull the unit from storage and look it over for buildup on the can or debris such as fishing line, trash, or vegetation. Check the zinc anode to make sure that it’s not corroded and doesn’t need to be replaced.
- Test your GFCI to make sure it is functioning properly.
Once you’ve taken the above steps, you’re ready to reinstall and enjoy your unit again. All fountains, aerators, and circulators can be run continuously once they are back in the pond.
Relaterade artiklar du kan vara intresserad av:
- Rengör luftkompressor filtret
- Den praktiska vägledningen om slam från damm
- Verktyg för att mäta din damm